Advantages of Fluorocarbon Aluminum Plate
Fluorocarbon aluminum plate manufacturer: Fluorocarbon aluminum plate has a unique texture, rich and long-lasting colors, diverse appearance, and can be perfectly combined with curtain wall materials such as glass and stone. It has a perfect appearance, excellent quality, and light weight. It is one-fifth that of marble and one-third that of glass curtain walls, greatly reducing the burden on the building structure and foundation. Moreover, it has low maintenance costs and a high cost performance ratio.
In terms of localization of fluorocarbon aluminum curtain walls, composite aluminum panels and aluminum alloy single panels are mainly used. This composite aluminum sheet is made of two layers of 0.5mm pure aluminum sheet (0.2-0.25mm for indoor use), with a interlayer thickness of 3-4 mm of polyethylene (PE or PVC), which is rolled and hot pressed. The product has some specifications, such as 1220mm × 2440mm. The fluorocarbon paint on the surface of composite aluminum plates is also completed by roller coating method and roller pressing heat fusion in one go, and the coating thickness is generally 20 μ Around m, this composite aluminum plate has the advantages of lightweight, smooth, good flatness, no color difference in the same direction, and has good on-site processing performance. In order to deal with changes in external wall dimensions caused by on-site construction errors, it shortens workshop processing time, installation period, and other advantages.
Fluorocarbon aluminum panel manufacturer: Fluorocarbon aluminum panels need to be cut and processed to produce wall panels during installation. First, the panels must be cut according to the secondary design dimensions. When cutting, the folded edges should be considered with additional dimensions, usually around 30mm on each side. According to the curtain wall installation company, the shear yield of the cut panels is generally 60%~70%.
When cutting composite panels, it is necessary to plan grooves on all four sides, that is, cut off a certain width of the inner aluminum plate and plastic layer, leaving only 0.5mm thick outer aluminum plate, and then fold it into a 90 degree external angle. Then, make the aluminum profile into a frame of the same size and place it in the groove where the aluminum plastic plate is bent. The bottom surface of the frame is bonded to the back of the aluminum plastic plate with structural adhesive, and the folded four sides are fixed to the outer side of the frame with pull nails. Generally, reinforcement bars need to be added in the frame, To ensure the mechanical strength of the wall panel, the reinforcing bars are made of aluminum material and bonded with structural adhesive. Some informal practices only add reinforcing bars at the four corners of the composite panel and bond them with double-sided tape, greatly reducing its firmness.
Fluorocarbon aluminum plate manufacturer: Fluorocarbon aluminum plate is generally 2-4mm aluminum alloy plate. After being made into a wall panel, the plate is directly folded according to the secondary design requirements, and the four corners are welded into a tight groove shape through high-pressure welding. There are reinforcement bars and fixed bolts on the back of the wall panel, and electric welding and nail planting are used. After the plate is processed, fluorocarbon paint is sprayed, usually in two or three layers, with a film thickness of 30-40 microns. Aluminum panels are easy to process into curved or multi folded edges or sharp angles, which can adapt to the ever-changing exterior wall decoration needs of today. They are rich in colors and can be freely selected according to the design and owner's requirements, truly expanding the design space of architects.
